Sep 09
MuvAudio v2.1.0.0 is now available for download.
Version History:
- Fixed an issue where the registration menu item was still shown to registered users
- Fixed an issue with vbr settings using the kHz setting of the last selected CBR setting
- Fixed an issue where the time remaining would show 5 to 1 seconds left when it had completed in “Watch Folder Mode”
- Fixed an issue where the error log files for skipped files would sometimes not be deleted and continually show upon recording completion
- Fixed an issue where some files with a capitalized extension were not being added in regular or watch folder mode
- Fixed an issue where “Watch Folder Mode” would stop searching for new files if it ever reached the point that it had converted all files in the selected folder and subfolder. If you now put files in any of those folders after it has searched and found none, it will now correctly keep searching and file and record the new files.
- Modified “Watch Folder Mode” to consider two files equivalent even if the casing is different
- Modified the way sessions start so that they all load before starting playback and recording (decreases startup time)
- Modified support for input files. MuvAudio2 now supports the following attributes: 8-16bit, 1-2 channels. Note: Support for the following attributes: 8-32bit, 8,000-192,000kHz, 1-8 channels (combined into 2) can be added by following the instructions in the FAQ.
- Modified MVC interrupts per millisecond to 5 to help prevent skips
- Modified estimated recording time algorithm
- Modified installer to detect if MuvAudio2 has been installed before regarding the addressing of the nView issue. The “View MuvAudio2 Users Guide” option is now unchecked by default. Added “Start MuvAudio2 on Finish” to final options (unchecked by default).
- Moved disabling of screensaver to be initiated by the console (read below for added support of disabling the disabling of the screensaver
- Added support for 120DPI at resolutions of 1280×1024 and higher (fixes issues with different things getting cutoff)
- Added support for disabling the automatic disabling of the screensaver (to do this, add an empty text file in your installation folder with the name of “ignoress.txt”, without quotes) – This is helpful if you still want your monitor to power down, if enabled, and you have the screensaver set to (None) in Windows.
- Updated Audio Control to use the same version as MuvAudio v1.7
For the latest version of MuvAudio, please visit our downloads section.
-The MuvEnum Development Team
Aug 11
MuvAudio v2.0.6.0 is now available for download.
Version History:
- Fixed a bug when starting MuvAudio related to the following error: “SplitterDistance must be between Panel1MinSize and Width – Panel2MinSize.”
- Fixed improperly closing of handle for MVC when closing the Console
- Fixed an issue that would randomly cause watch folder mode to not move or delete files based on the setting the user chose
- Fixed an issue regarding random crashes in the file “drmv2ctl.dll” caused by the Windows Media Player 11 Beta
- Fixed an issue where files being skipped in quick progression would cause crashes in the file “drmv2ctl.dll” caused by the Windows Media Player 11 Beta
- Fixed an issue where recording wouldn’t start or only a few sessions would start if each session duration was calculated to be exactly the same
- Modified the Reset Soundcard application to notify users that their soundcard has been set successfully set with a messagebox that auto closes after 5 seconds, instead of setting and exiting which makes it look like it didn’t do anything.
- Modified the application to use visual styles without having to have a manifest file
- Modified the MVC interrupts per millisecond to 8 to help prevent skips
- Added messagebox to notify that an instance of MuvAudio2 Console is already running if you try to open it twice (some users didn’t realize it was a tray icon)
- Added better deletion of incomplete files due to errors or closing the program in the middle of the conversion process
- Added detection to automatically change the number of virtual cables to 10 if the user had modified the number of virtual cables to be less than the recording speed chosen
- Added detection to the Console to not get covered for users that have the Start Menu on the top of their screen
- Added reopening of MuvAudio2 if a previous session was reported as not starting successfully (when detected, it corrects the issue which triggers the restart of the program)
- Updated buttons that link to websites possibly throwing an error when a default browser is not setup properly on the users system
- Updated maximum recording speed detection to compensate for certain processors not being able to handle higher recording speeds
- Removed the resetting of the system default recording device as it is no longer needed
For the latest version of MuvAudio, please visit our downloads section.
-The MuvEnum Development Team
Jul 27
MuvAudio v2.0.5.0 is now available for download.
Version History:
- Fixed the update screen not closing out the whole program when it says it is going to to install an update.
- Fixed the “e” on “filename” not showing
- Really fixed the following error which would cause the program to not record any files: “Value does not fall within the expected range” (the cause was soundcards reporting devices as recording devices that were not recording devices)
- Updated support for input files. MuvAudio2 now supports the following attributes: 8-32bit, 8,000-192,000kHz, 1-8 channels (combined into 2)
- Removed icon from manual activation screen to fix an issue with it sometimes not opening.
For the latest version of MuvAudio, please visit our downloads section.
-The MuvEnum Development Team
Jul 23
MuvAudio v2.0.4.2 is now available for download.
Version History:
- Fixed crash on startup with to the following error: "An attempt was made to load a program with an incorrect format"
- Fixed an issue regarding watch folder mode crashing when trying to search folders that return an "access denied" error
- Fixed the following error (if it still occurs, try reinstalling MuvAudio2): "Value does not fall within the expected range"
- Fixed some cases where the WMP COM object was being disposed prematurely with the following error: "COM object that has been separated from its underlying RCW cannot be used"
- Fixed an occasional threading issue when playing a song
- Fixed an issue with files that had errors not related to missing licenses would still be moved/deleted/left alone when they should’ve been ignored
- Fixed an issue where Watch Folder Mode wasn’t saving the settings until it was closed
- Fixed an issue where if you clicked on "Stop and Exit" in the console before the sessions finished loading, it would reset your settings
- Fixed exception when you would double click a song to preview while a song was already being previewed
- Fixed an issue with the close method running after some items had been disposed, which in turn would give an error message on closing
- Fixed issue where watch folder mode on the initial search sometimes would not hide and/or would make it look like the program had frozen
- Fixed an error with Manual Activations
- Added time between session loads to help with some users having the first second of the audio cut off of the first song in each session
- Added option to create a Desktop icon during installation
- Changed watch folder mode to add 25 songs per recording speed instead of 50 to decrease the time between new searches
- Changed MVC interrupts per millisecond to 10 to decrease cpu usage and help prevent skips
- Removed the need for the "tempmmcsettings.xml" file
- Removed unnecessary playstates to improve performance
- Modified resizing code to help with an error regarding the splitterdistance on the main form
- Modified trial sound placement to help fix a "the file is in use" error
- Moved WMP setting changes further down in the loading of the form to allow more time for creation of WMP COM object
- Modified the temporary license to still show the trial screen, but let the user know it is acting as the full version and let them retry the activation before the temporary license expires
For the latest version of MuvAudio, please visit our downloads section.
-The MuvEnum Development Team
Jul 17
MuvAudio v2.0.2.5 is now available for download.
Version History:
- Fixed crash when trying to activate (rare)
- Fixed issue where an activation code was deemed incorrect with certain registration names (all codes should work now)
- Fixed an issue with the “add files to playlist” erroring out when closing or changing directories improperly
- Added detection when you first run MuvAudio2 to make sure MuvEnum Virtual Cable is installed properly, and if not, deletes the mvc file, so that a reinstall of MuvAudio2 should fix the issue.
- Fixed an issue where the watch folder, if files were being recorded in it were completed, the folder would be removed and you would get an error the next time it tried to search the folder
For the latest version of MuvAudio, please visit our downloads section.
-The MuvEnum Development Team
